Page 1 of 1
Carb settings for Bassani pipe
Posted: Mon Apr 08, 2013 10:19 pm
by bdento59
Any suggestions on carb setup for Bassani pipes? The bike is an otherwise stock '80, TIA.
Re: Carb settings for Bassani pipe
Posted: Tue Apr 09, 2013 7:53 am
by steve murdoch icoa #5322
I had a Bassani on a '79 with stock carbs that had a mid rev stumble.
Replaced the single K&N paper air filter with the stock Honda foam filter and it ran very well.
That was with the wide/loud baffle.
Re: Carb settings for Bassani pipe
Posted: Tue Apr 09, 2013 8:45 pm
by bdento59
K&N paper filter? Is there such a thing? I thought that all K&N filters were oil impregnated cotton.
Re: Carb settings for Bassani pipe
Posted: Wed Apr 10, 2013 8:18 am
by Jeff Bennetts
110 mains and the needles shimmed 20 thousand.
Re: Carb settings for Bassani pipe
Posted: Wed Apr 10, 2013 8:33 am
by steve murdoch icoa #5322
bdento59 wrote:K&N paper filter? Is there such a thing? I thought that all K&N filters were oil impregnated cotton.
My mistake.
Fortunatley in my case and i repeat in my case only, the swap to the stock foam filter relieved the stumble.