Titanium Bito 6-1 exhaust


Post Reply
coulisnosaj
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 4
Joined: Tue Jun 01, 2010 9:30 pm
Location: Los Angeles
Location: Los Angeles, CA

Titanium Bito 6-1 exhaust

Post by coulisnosaj »

Hello ICOA,
This is my first post so go easy on me....anyone have first hand experience with this exhaust, any better than a pipemaster or Schuele? Assuming it's much lighter, but was more interested in the performance. They make some big claims with the FCR carbs....any thoughts would be greatly appreciated.

http://www.phildentonengineering.com/pr ... sp?pid=895



Titanium exhaust

* Releases far more power than any other after market system currently available
* Used with Bito R&D FCR carburettor set will add 30 plus BHP! With careful cylinder head porting and polishing this can can be up to 40 BHP!
* Saves approx 12 kilos in weight!

Code: 200-03-404

Price: £2,420.00
Bito R&D all titanium exhausts system. Helps release much more power due to superior extractor effect. When combined with Bito R&D carburettor set and careful engine preparation 40 plus BHP can be added giving modern levels of super bike performance.
Using the standard CBX chassis/brake set up is not advisable unless great care is observed! Please note this exhaust saves approx 12 kilos in weight compaired to the standard original, add this to the magnesium wheels and save another 20 plus Kilos. Total 32Kilos (70Ibs if you are from the U.K or USA).

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3872
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Re: Titanium Bito 6-1 exhaust

Post by NobleHops »

coulisnosaj wrote:Hello ICOA,
This is my first post so go easy on me....anyone have first hand experience with this exhaust, any better than a pipemaster or Schuele? Assuming it's much lighter, but was more interested in the performance. They make some big claims with the FCR carbs....any thoughts would be greatly appreciated.

http://www.phildentonengineering.com/pr ... sp?pid=895
Hey Jason, welcome to the site!

CBXMEL on this site is the president of the UK CBX club. If none of the usual suspects here has an opinion, it's a safe bet he does. Go ahead and PM him is my suggestion.

N.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4074
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: Titanium Bito 6-1 exhaust

Post by steve murdoch icoa #5322 »

Welcome to the site, Jason.
Sorry, no info on the Denton system
Are you still running the Scheule? Any down side to it?

User avatar
zxbob
Power Poster
Power Poster
Posts: 319
Joined: Sun May 09, 2010 8:08 am
Location: Smug - Ca.
Location: "Smug" - California

Re: Titanium Bito 6-1 exhaust

Post by zxbob »

Nize pipe . . . . but it'll take a few of these

Image

Bob
Good parts aint cheap ~ and cheap parts aint good !

coulisnosaj
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 4
Joined: Tue Jun 01, 2010 9:30 pm
Location: Los Angeles
Location: Los Angeles, CA

Re: Titanium Bito 6-1 exhaust

Post by coulisnosaj »

you ain't kiddin!!!

Post Reply

Return to “EXHAUSTS: What works and fits...and what doesn't.”