Page 3 of 3

Re: right i am ready to do some pipes fr you people

Posted: Thu Apr 22, 2010 8:44 pm
by Jeff Bennetts
zorstec wrote:sorry for the delay

ok anybody ready to have some pipes made??
thanx andy
Any details?

jeff

stainless exhaust for cbx 1000

Posted: Fri Apr 23, 2010 3:00 am
by zorstec
Hi

If you let me know what you would like making exactly i will get on with them.
Are we going 6 into 1
6 into 2
6 into 6

or 6 into 12 oh boy what about 6 into 9 lol 3 each side and 3 under the seat

or are we making oneoffs all different for everyone

thanx for the response

i have have someone just wanting the mega style silencer for the standard headers

All the best andy

zorstec@aol.com

6 into 1 anybody

Posted: Wed Apr 28, 2010 2:39 pm
by zorstec
3925

Posted: Wed Apr 28, 2010 2:54 pm
by TerryL
Is the oil filter accessible w/o removing the headers? Can any muffler be used?

Posted: Wed Apr 28, 2010 3:01 pm
by zorstec
HI
As i make systems to your spec i can make it easy to get the filter off
this is just one example of my work make to a customers spec
thanx andy

Posted: Wed Apr 28, 2010 3:01 pm
by zorstec
HI
As i make systems to your spec i can make it easy to get the filter off
this is just one example of my work make to a customers spec
thanx andy

Re: 6 into 1 anybody

Posted: Wed Apr 28, 2010 3:02 pm
by NobleHops
zorstec wrote:3925
OK, those look very cool.

N.

Posted: Wed Apr 28, 2010 3:05 pm
by zorstec
Thank you
andy

Posted: Wed Apr 28, 2010 8:21 pm
by steve murdoch icoa #5322
Cool pipes, Andy.
I would like to see more of the engine mounts. Your design as well?

Posted: Wed Apr 28, 2010 8:36 pm
by EMS
steve murdoch icoa #5322 wrote:Cool pipes, Andy.
I would like to see more of the engine mounts. Your design as well?
Judging by the rake of the front fork, this looks like a "Chopper" frame" :? :?

Posted: Thu Apr 29, 2010 4:38 pm
by zorstec
yes it was a custom frame and looked really good work

Re: exhausts by zorstec exhaust solution

Posted: Fri May 07, 2010 9:18 am
by tiger956
I'm a buyer for a 6-2 Kerker style complete system in SS for a '82 model in the $1,250 range and would purchase them now... standard header connection is fine with me.. Center stand rentention and ground clearance as close to stock pipes as possibe.... Time Period?

Re: exhausts by zorstec exhaust solution

Posted: Tue May 11, 2010 7:01 pm
by Jeff Bennetts
I have a set of old style Kerkers and a Hindle system that I still need to get down from the garage attic and take pictures of to send Andy, I'll get this done by the end of the week.

jeff

Re: exhausts by zorstec exhaust solution

Posted: Tue May 11, 2010 8:50 pm
by zorstec
Would anyone else like a set whilst I have a bike in to use as a jig??
thanks Andy