Page 2 of 3

Posted: Wed Jan 27, 2010 1:05 am
by zorstec
Thank you all for the great response and kind words of welcome.
Little insight to me and zorstec.
I started this company 12 years ago, in the early years i pushed promotions with streetfighters mag over here in the uk and had center spreads front covers big time,
With my wife falling really ill i had to back of with work and get her better.
Now everything it cool.
I have had a few cbx"s and spares for them and built a streetfighter cbx for myself 6 years ago. will get photos together asap
i have only ever been asked to make zorsts for 3 in 10 years so never thought the market was worth pushing here in the uk.

We could have a problem with the shipping costs but if i get a few orders we can make it work.

i only work in stainless steel.
also my work here in the uk is all from recommendation i do not advertise and havent for 4 years.

thanks andy

Posted: Wed Jan 27, 2010 2:26 am
by zorstec
3811

heres my baby!

Posted: Wed Jan 27, 2010 4:13 am
by alimey4u2
zorstec wrote:3811

heres my baby!
OH Boy, I bet she's loud... 8)

Posted: Wed Jan 27, 2010 4:18 am
by zorstec
to be honest its perfect but i am deaf so lol, no really the cbx is not so loud i have baffles inside the pipes and i dont need full power just the hard look so poeple say bet shes loud. gets them talking see.
i think too much silencer on this would spoil it so shorts for me.

Posted: Wed Jan 27, 2010 4:22 am
by alimey4u2
You must have some bike friendly coppers in Shipley.... :lol:

Posted: Wed Jan 27, 2010 4:28 am
by zorstec
yer right is thy such a thing as a friendly copa?
the bike is over the age for noise level testing and its legal so no problems, except the 6 flames on overrun now thats not legal i dont think??
Ps never heard this before lol x

center stand

Posted: Wed Jan 27, 2010 4:53 am
by zorstec
Just so you know. As we make exhausts from start to finish, you get what you really want and that means if you would like to keep your center stand then you keep it.
3812
3813[/url]

Posted: Wed Jan 27, 2010 1:50 pm
by alimey4u2
Top pic.... Great way of blowing the dust off your riding boots... :lol:

Posted: Wed Jan 27, 2010 3:37 pm
by Don
zorstec wrote:ok, what sort of price would these be worth to people to buy?
could do with a group buy if your reading this anybody else that would be interested???
People were paying $750 and up for a complete set of the old Kerkers in chromed steel back when they were still available - If you're doing them in 100% stainless, $1K to $1250 would be no problem for most buyers . . . . assuming they're equal to the fit and quality that Kerker had. Some sort of adjustable/removable baffle would be nice

If you're just doing the headers back to the collector so that buyers could fit the muffler of their choice, then I think $400 to $500 would be a good price point for just the headers with collector

Don

Posted: Wed Jan 27, 2010 4:22 pm
by zorstec
ok, is that the spring fit headers? whats to deal with this just so you can get it off faster?why? just asking as i dont like then thats all plus it put the price up
thank for your comments everybody
just wait till you get the zorsts you will be wanting another bike for another set of pipes to go on

Posted: Wed Jan 27, 2010 6:31 pm
by Jeff Bennetts
zorstec wrote:ok, is that the spring fit headers? whats to deal with this just so you can get it off faster?why? just asking as i dont like then thats all plus it put the price up
thank for your comments everybody
just wait till you get the zorsts you will be wanting another bike for another set of pipes to go on
The spring quick release isn't necessary but desirable because it allows you to remove the system without replacing the header gaskets every time, no biggie.

Also like Don says if you make a three peice system, header, mid pipe and muffler (be it a megaphone or canister) the system could come in three different price ranges.

Posted: Thu Feb 04, 2010 12:08 pm
by cbx1260cc
Any possibilities of a pipe being made?

Posted: Thu Feb 04, 2010 1:38 pm
by Jeff Bennetts
cbx1260cc wrote:Any possibilities of a pipe being made?
The last I heard he was going to regroup and do some research and do-diligence to find out the expenses on his end.

right i am ready to do some pipes fr you people

Posted: Thu Apr 22, 2010 12:08 pm
by zorstec
sorry for the delay

ok anybody ready to have some pipes made??
thanx andy

please email me direct as i dont get much chance to log in

Posted: Thu Apr 22, 2010 12:10 pm
by zorstec
zorstec@aol.com
drop us an email if i dont reply on this forum please
thanx andy