Page 1 of 3
6 into 1: here we go again – now what’s this thing?
Posted: Sat Jan 16, 2010 3:37 pm
by Sleepless
Welp, a week ago I joined the Forum, and posted a topic that immediately got off to a bad start:
(see “6 into 1: what brand is this thing? worth saving?â€
Posted: Sat Jan 16, 2010 4:03 pm
by EMS
"Bassani" is/was an exhaust manufacturer. They also had an exhaust for the CBX. It is one of the rarest of all aftermarket pipes.
Whether this is a Bassani, I can't say. I never saw one.
Posted: Sat Jan 16, 2010 4:04 pm
by steve murdoch icoa #5322
Posted: Sat Jan 16, 2010 4:37 pm
by steve murdoch icoa #5322
The only other pipe i remember looking anything like that is a Dicks Cycle West Racer 1 exhaust.
Sorry Sleepless, i could not find a pic of one of them.
Posted: Sat Jan 16, 2010 5:21 pm
by Don
Looks like a Bassani to me too - Compare it to Mike Barone's avatar pic
NOW you've found something worth investing some time/money into Sleepless - Nice find!
Don
Posted: Sat Jan 16, 2010 5:35 pm
by Sleepless
Steve M and Don have me convinced already that it is a Bassani - thanks.
(Now, if you know that Kmart made a similar model in the early '80s, be a sport and keep it to yourself. I'm on a roll !)
But, at the risk of getting flamed .... EMS, you HAVE seen this before. Looky here, in Mopar Tony's pic from a cupla weeks ago. That's the pipe, there, hiding at the bottom of jacket pic
viewtopic.php?t=5530&start=0&postdays=0 ... highlight=
Sorry !
~Sleepless
Posted: Sat Jan 16, 2010 7:24 pm
by EMS
Sleepless wrote:
But, at the risk of getting flamed .... EMS, you HAVE seen this before. Looky here, in Mopar Tony's pic from a cupla weeks ago. That's the pipe, there, hiding at the bottom of jacket pic
Sorry !
~Sleepless
No need to be sorry, sleepless! These pipes
may be Bassanis, but I dismissed them as a 4 into 1. You can clearly see that only 2 headers go into one collector
..Unless the third header really hides in the way the photo was taken.
Posted: Sat Jan 16, 2010 7:33 pm
by Jeff Bennetts
Heres a couple pics of the Bassani I reconditioned for Mike, the end cap of the baffle is different on yours, I can't tell from your pic but it looks like yours transitions differently from the collector back to the muffler also .
Posted: Sat Jan 16, 2010 9:11 pm
by Sleepless
thanks Jeff. That is one mean look'n bike.
Looking at "real life" vs. your pics, everything looks identical except the end cap, as you noted. What I don't get is why there are 6 small, threaded holes at the end of my baffle, versus when looking at your pic, the end cap is likely held in by the same 2 screws that hold the core in (at the 6 and the 9 o'clock position).
Huh.
And mine doesn't have a gap between the core and the outer pipe for the end cap anyway. Seems like I'm missing an end cap of a diff design. Send the pipe back
As an aside, someday I'll take the grad-level course for loading pics to this forum. Seems like you fellas have it mastered (yes, I printed out the Pix Help, and read it too!)
~Sleepless
Posted: Sat Jan 16, 2010 9:37 pm
by Sleepless
One of the daughter's, in a moment of corrupt but brilliant thinking just now, asked if, since I wanted to hear a fancy exhaust, could I not just skip the motorcycle part and substitute in the leaf blower.
I told her it is too late to wake the neighbors but, jeez, I think we have Toro-Bassani alignment
Maybe by tomorrow she forget this idea...
~Sleepless
Posted: Sat Jan 16, 2010 11:24 pm
by Mike Barone #123
Sleepless wrote:One of the daughter's, in a moment of corrupt but brilliant thinking just now, asked if, since I wanted to hear a fancy exhaust, could I not just skip the motorcycle part and substitute in the leaf blower.
I told her it is too late to wake the neighbors but, jeez, I think we have Toro-Bassani alignment
Maybe by tomorrow she forget this idea...
~Sleepless
That Toro pix is one of the most creative connection of unrelated things I have ever seen about CBXs in all these years.
Also...You did not get off to a bad start here at all........you asked a q for everyone here ...smart way to procede....and people replied. It saved you from making a mistake....and keep this in mind once.... after you get your CBX going and rides some miles, you will be answering questions here from others. It is the natural progression of things....and a good one for us all.
Finally...you are about 2 hours from my sons in NC...next time I get down there, I will pm you and we can meet up.
Mike
Posted: Sun Jan 17, 2010 11:17 am
by alimey4u2
Thanks to Piit's post & with Mel's permission at UKCBXCLUB, I have posted this here.( Thank you Gents.) Should spark some interest..
http://www.phildentonengineering.com/pr ... sp?pid=895
Posted: Sun Jan 17, 2010 12:25 pm
by steve murdoch icoa #5322
Way to go Larry...more time spent by me looking for sound clips.
Got any more?
That Bito sounds nice and it had better for that price.
http://www.youtube.com/watch?v=N2MbdOpQFww
Posted: Sun Jan 17, 2010 1:01 pm
by Jeff Bennetts
Posted: Sun Jan 17, 2010 1:37 pm
by Rick Pope
for Christmas, I recieved a set of Bose noise cancelling headphones. They have a cord to plug into the laptop. What a great way to listen to these clips.