Slight discoloring on exhaust pipe, Remedies ?


Post Reply
acadia81
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 16
Joined: Wed Jun 01, 2005 5:28 pm

Slight discoloring on exhaust pipe, Remedies ?

Post by acadia81 »

I have an '82 CBX with low miles, 5100, and the pipes have a slight
yellow tinge, not quite blue. Anyone have any ideas how to clean them
up. I thought I'd ask before I start trying rubbing compounds or
polishes. Thanks for the help.

User avatar
alimey4u2
ICOA Web Video Director
ICOA Web Video Director
Posts: 5093
Joined: Fri Aug 11, 2006 1:03 pm
Location: Uphill, WsM, United Kingdom

Post by alimey4u2 »

Blue Away works well but is quite aggressive, so I wouldn't apply it too often as it will eventually remove/thin your chrome.....

http://www.instantop.com/CyclePage/Cleaners_misc.htm
ICOA # 656

daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4751
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Post by daves79x »

Blue Job seems to work better than Blue Away and isn't as hard on the chrome.

Dave

User avatar
GregW
ICOA Member
ICOA Member
Posts: 157
Joined: Fri Oct 29, 2004 8:34 pm
Location: Kansas, USA
Location: Kansas, USA

Post by GregW »

I used Blue Job on my '80 to get rid of that nasty yellow tinge about 3 years ago. Followed it up with FLITZ polish. I usually do a FLITZ or SIMICHROME polish in the spring & again just before I put the bike into winter hibernation. Seems to be working well. The yellow hasn't returned & the pipes sure look purdy!! :face:
Greg
You can never have too many motorcycles.

Chris
Amazing Poster
Amazing Poster
Posts: 1299
Joined: Fri Jan 16, 2004 2:00 pm

Post by Chris »

GregW wrote:I used Blue Job on my '80 to get rid of that nasty yellow tinge about 3 years ago. Followed it up with FLITZ polish. I usually do a FLITZ or SIMICHROME polish in the spring & again just before I put the bike into winter hibernation. Seems to be working well. The yellow hasn't returned & the pipes sure look purdy!! :face:
Greg
I like Simichrome as well. It appears to be very low abrasive and can remove some minor blue/yellow on the pipes.

User avatar
GregW
ICOA Member
ICOA Member
Posts: 157
Joined: Fri Oct 29, 2004 8:34 pm
Location: Kansas, USA
Location: Kansas, USA

Post by GregW »

A friend of mine turned me on to FLITZ a few years back. We both like guns (go figure) & he found FLITZ was good for cleaning off the burnt powder that sticks to the gas cylinder & slide of semi-auto shotguns. It actually involves less elbow grease than SIMICHROME & doesn't appear to be any more abrasive. And I'm all for ease of maintenance.
:D
Greg
You can never have too many motorcycles.

Post Reply

Return to “EXHAUSTS: What works and fits...and what doesn't.”