Anti Bluing for Chrome headers


Post Reply
Ed L

Anti Bluing for Chrome headers

Post by Ed L »

What is the "coating" that applies inside header pipe to help prevent bluing?
Thanks,
Later,
Ed #5428

cbxchris

Post by cbxchris »

Same people that make the creem for tanks make this. It works. I used it on one of Tims chrome 6 into 1`s over 5 years ago....chrome still looks good. You need to use it on a new pipe though.

User avatar
SS
Forum Regular
Forum Regular
Posts: 95
Joined: Wed Mar 05, 2003 4:37 pm
Location: Just south of Graceland
Contact:

Kreem Products

Post by SS »

SS

#5671

Someone who thinks logically provides a nice contrast to the real world.

01 XL1200C 83 CB1100F 82 CBX 80 CBX

so far!!!!!!!!!!

E L

Post by E L »

Thanks guys.
I actually found this product in local store (expensive). I do have new DG's 6:1.
Helpful hints:
This stuff is like a glazing used for pottery.
I dumped the whole bottle into container and mixed the "globs" until disolved into solution.
Did first coat by pouring contents into 6 "wax" dixie cups. each cup for each pipe. This was a "cold" coat. Excess material back into cup.
Put pipes in oven at aprox. 200 for a few hours and while "hot" (be sure to put on those gloves) :oops: went back to each cup and poured in while very "quickly" rotating pipe to spread evenly through out. Then back in oven for a few more hours. Final application looks good an even.
We shall see the good it does in awhile.
Later,
Ed #5428

tgraytn
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 10
Joined: Sun Feb 03, 2008 1:33 pm
Location: Tennessee

Kreem Products.Net Blue Shield

Post by tgraytn »

The folks at www.kreemproducts.net are phenomenal! Here is a link to their Blue Shield product:

http://www.kreemproducts.net/p-19-blue-shield.aspx

This product works extremely well!

They ALWAYS have the product in stock, they ship the same day, and tehy use FedEx.

Post Reply

Return to “EXHAUSTS: What works and fits...and what doesn't.”