Delkevic ground clearance


Post Reply
charlie27
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 4
Joined: Fri Mar 31, 2017 12:32 pm
Location: San Dieog/CA/USA
Location: San Dieog/CA/USA

Delkevic ground clearance

Post by charlie27 »

hi, new to CBX and forum. Just swapped out the Mac system that came on the bike with the Delkevic to get closer to stock look and sound. All good with the exception of ground clearance on how the system stands off the side and center stand. Any ways to make this a bit better? Cut down the rubber cushions?
thanks

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4068
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: Delkevic ground clearance

Post by steve murdoch icoa #5322 »

Sounds like the problem has been around for a while.
This old thread has a bit of info on the side stand at least.

http://cbxpress.com/forum/viewtopic.php ... 62&start=0

Post Reply

Return to “EXHAUSTS: What works and fits...and what doesn't.”