Do any CBX exhausts use this configuration?


steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4069
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: Do any CBX exhausts use this configuration?

Post by steve murdoch icoa #5322 »

FalldownPhil wrote:
Thu Mar 30, 2023 5:24 pm
This might be a good time to say that Rick Chupp is closing Cycle Outfitters. You should probably contact him sooner rather than later. I recently asked him if he was still supplying the manifolds for the carbs and the answer was yes.
Thanks for that, Phil.

User avatar
Jeff Bennetts
Posting God
Posting God
Posts: 2408
Joined: Wed Mar 05, 2003 8:38 am
Location: Ohio, USA
Location: Ohio, USA

Re: Do any CBX exhausts use this configuration?

Post by Jeff Bennetts »

The link I posted for Cycle Outfitters is still working but the drill down menus are turned off, give them a call for your needs.

Call the 1 888 number on the home page of the site and listen to the days and hours of operation, they are selling leftover inventory and displays.

User avatar
Duffey Lake rd.
Forum Regular
Forum Regular
Posts: 135
Joined: Sat Aug 03, 2019 4:04 pm
Location: Burnaby BC CANADA
Location: Burnaby BC CANADA

Re: Do any CBX exhausts use this configuration?

Post by Duffey Lake rd. »

The left side of my new exhaust just pops off in a few minutes, handy to put the center stand back on for oil changes or upright storage. Not too loud or it can be without the removable DB Killer.
-Scott
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “EXHAUSTS: What works and fits...and what doesn't.”