Wire Harness


Post Reply
Stevetddz71
ICOA Member
ICOA Member
Posts: 6
Joined: Sat May 17, 2014 2:48 pm
Location: Santa Barbara, Ca
Location: Santa Barbara, Ca

Wire Harness

Post by Stevetddz71 »

Hi can anyone tell me if the wire harness goes over or under the frame bracket behind the coils for a 1979, and according to the service manual 2 wire bands in front and one behind any help would be appreciated, Thanks Steve

tevan
ICOA Member
ICOA Member
Posts: 702
Joined: Sun Apr 25, 2010 8:47 am
Location: Charleston, Illinois, USA
Location: Charleston, Illinois, USA

Re: Wire Harness

Post by tevan »

I believe it goes under. I think you are right on the bands.

Stevetddz71
ICOA Member
ICOA Member
Posts: 6
Joined: Sat May 17, 2014 2:48 pm
Location: Santa Barbara, Ca
Location: Santa Barbara, Ca

Re: Wire Harness

Post by Stevetddz71 »

Thanks Tevan and yes it looks like it goes under the bracket I found another page in my shop manual that clearly shows that. I was looking at the Digital Pizza site and it shows the harness over the top I tried that and it just didn't seem right, Thanks again, Steve

donny dotson
ICOA Member
ICOA Member
Posts: 116
Joined: Tue Sep 09, 2014 6:43 pm
Location: San Diego
Location: San Diego

Re: Wire Harness

Post by donny dotson »

The only reason I'm sure is that i copied a unmolested bike.
IMG_1972.JPG
IMG_1971.JPG
You do not have the required permissions to view the files attached to this post.

Stevetddz71
ICOA Member
ICOA Member
Posts: 6
Joined: Sat May 17, 2014 2:48 pm
Location: Santa Barbara, Ca
Location: Santa Barbara, Ca

Re: Wire Harness

Post by Stevetddz71 »

Thank you very much really appreciate your reply and for the pictures I had mine routed correctly, Thanks again, Steve

Post Reply

Return to “ELECTRICAL: Alternator, Batteries, Headlights, Switches, Tailights, Wiring....”