I finally got my blinker problem figured out , only to find I have no brake light, using either brake, so I kind of doubt both switches failed at the same time.
I believe the brake light is staying on at all times.
Anyone recommend a place to start looking for the problem?
Is there any brake wiring in the headlight shell?
That's where my blinker problem was.
brake lights not working
-
johnod
- ICOA Member
- Posts: 105
- Joined: Tue Jan 26, 2010 5:04 pm
- Location: Ontario, Canada
- Location: Ontario, Canada
-
EMS
- ICOA Member
- Posts: 10151
- Joined: Wed Mar 05, 2003 7:55 am
- Location: North East OH, ICOA 3904
Re: brake lights not working
If the light is staying on all the times, it may well be one of the switches that is stuck/kaputt.
-
Rick Pope
- ICOA Rally Director
- Posts: 2275
- Joined: Wed Sep 03, 2003 3:16 pm
- Location: Lawrencburg, IN
- Location: Lawrenceburg, Indiana
Re: brake lights not working
Try un-plugging the wire from the front switch. It's under the front master cylinder.
Rick Pope
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.
-
johnod
- ICOA Member
- Posts: 105
- Joined: Tue Jan 26, 2010 5:04 pm
- Location: Ontario, Canada
- Location: Ontario, Canada
Re: brake lights not working
Yes it was a brake switch sticking, the rear one.
Thanks
Thanks