81 Rear Turn Signals
-
dramacydal
- New Member & Happy To Be Here
- Posts: 6
- Joined: Thu Jul 26, 2012 3:17 am
- Location: Silverdale, WA
- Location: Silverdale, WA
81 Rear Turn Signals
I recently picked up a 1981 CBX. I decided to remove the saddle bags including the brackets to support them. The bike came with cheap after market turn signals installed on the bracket. I was wondering if anyone knew what turn signals I could install in the hole where the saddle bag bracket use to bolt up to? I googled and found some rear turn signals for an 81 CBX on this site, but I'm not sure they would fill up the hole where the saddle bag bracket was installed. http://www.partsnmore.com/parts/honda/c ... ng]=custom
You do not have the required permissions to view the files attached to this post.
-
daves79x
- ICOA Technical Director
- Posts: 4757
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: 81 Rear Turn Signals
Welcome! You can buy a signal relocation kit from TIMS, then get a set of stock rear signals to finish the job.
Dave
Dave
-
dramacydal
- New Member & Happy To Be Here
- Posts: 6
- Joined: Thu Jul 26, 2012 3:17 am
- Location: Silverdale, WA
- Location: Silverdale, WA
Re: 81 Rear Turn Signals
Thank you!
-
vinceciotti
- ICOA Member
- Posts: 49
- Joined: Wed Sep 28, 2005 2:13 pm
- Location: Right Here!
- Location: Right Here!
- Contact:
Re: 81 Rear Turn Signals
Interested in selling the bags? I need aleft-hand one for an 82 CBX...