No signs of wear and the springs snap back when the rotated clockwise but i noticed it moves laterally about 2mm. The washer is there and the bolt is tight.
Spark advance assembly.
-
steve murdoch icoa #5322
- ICOA Member
- Posts: 4074
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Spark advance assembly.
Should there be ANY lateral movement in the spark advance assembly?
No signs of wear and the springs snap back when the rotated clockwise but i noticed it moves laterally about 2mm. The washer is there and the bolt is tight.
No signs of wear and the springs snap back when the rotated clockwise but i noticed it moves laterally about 2mm. The washer is there and the bolt is tight.
-
CBX-tras
- ICOA Member
- Posts: 395
- Joined: Tue Feb 16, 2010 1:29 pm
- Location: Clinton Twp, Michigan
- Location: Clinton Twp., Michigan, USA
Re: Spark advance assembly.
The reluctor is large enough to trigger the pickups.
No movement = no advance.
No movement = no advance.