Hi Guys
I'm putting my carbs back together and just wondered if someone could confirm which way around the main needle guide goes. this is the one in center of the carb body and which is held in place by the emulsion tube. it has a rounded end one side which I presume butts up against the emulsion tube and an open end which I presume is the end that sticks up inside the carb body and the side from which the main needle enters from? looking at a drawing, its hard to tell which way up it goes.
Martin
needle and guide
-
- Forum Regular
- Posts: 93
- Joined: Sun Apr 06, 2014 8:49 am
- Location: United Kingdom
- Location: United Kingdom
-
- ICOA Member
- Posts: 4074
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: needle and guide
Correct, Martin.
The open end faces up.
The open end faces up.
-
- Forum Regular
- Posts: 93
- Joined: Sun Apr 06, 2014 8:49 am
- Location: United Kingdom
- Location: United Kingdom
Re: needle and guide
Cheers Thanks for your help
Martin
Martin