some people need their tools taken away.....

Post Reply
User avatar
Mike Nixon
ICOA Member
ICOA Member
Posts: 375
Joined: Thu Aug 14, 2003 10:52 pm
Location: Prescott, AS
Location: Prescott, AZ
Contact:

some people need their tools taken away.....

Post by Mike Nixon »

Check out this deal. Broken off idle mixture screw tip. Then notice the tool marks on the throttle plate and carb casting. A client of mine who had his bike "serviced" by a shop. Sigh....

Image

EMS
ICOA Member
ICOA Member
Posts: 10151
Joined: Wed Mar 05, 2003 7:55 am
Location: North East OH, ICOA 3904

Re: some people need their tools taken away.....

Post by EMS »

Unfortunately, carbs are becoming a rare item on motorcycles and so will the people who know how to work on them. With the turnover of mechanics at dealerships and the refusal of shops to work on anyhting older than 10 years, another four or five years and none of the guys wrenching has ever seen a bike with carbs on it.

User avatar
Mike Nixon
ICOA Member
ICOA Member
Posts: 375
Joined: Thu Aug 14, 2003 10:52 pm
Location: Prescott, AS
Location: Prescott, AZ
Contact:

Re: some people need their tools taken away.....

Post by Mike Nixon »

I think that's true already. I had a customer several years ago who, a young guy with a new mechanical engineering degree and the owner of a "cool oldschool" CB750 SOHC, said to me after I did his carbs, "Man, I understand fuel injection, but carburetors? Too mysterious.". True story. :-). More to the point of this picture, my client took his bike to a shop known for being familiar with CBXs and they not only banged uo the carb, broke other parts, and broke off this mixture screw, but the tool marks on the throttle plate and carb casting suggest that they also removed the carbs, had a look, and put them back on. My client tells me they gave him the bike back, saying"we can't fix it.". Indeed.

User avatar
Mike Nixon
ICOA Member
ICOA Member
Posts: 375
Joined: Thu Aug 14, 2003 10:52 pm
Location: Prescott, AS
Location: Prescott, AZ
Contact:

Re: some people need their tools taken away.....

Post by Mike Nixon »

Success!

Image

Image

My apologies if you followed this thread on both forums.....

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4069
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: some people need their tools taken away.....

Post by steve murdoch icoa #5322 »

It was never in doubt, Mike.
All i know is none of my hammers are small enough to have been any use.
Do i see a bigger guitar string in your future?

Post Reply

Return to “CARBS: Cleaning, Rebuilding, Swaps, Aftermarket, Tuning, Syncing, and More”