Cold Cylinders x 2

User avatar
herdygerdy
Power Poster
Power Poster
Posts: 266
Joined: Fri Nov 22, 2013 9:48 pm
Location: Sydney, Australia
Location: Sydney, Australia

Re: Cold Cylinders x 2

Post by herdygerdy »

Hi Hound Dog,

Whereabouts in Sydney are you? I am pretty sure I can help, but will be out of town for the early part of this week. I am in the Inner West.

PM me your details and I am confident that together we can get this sorted for you quick smart, even if it means taking parts off mine to help isolate your problem.

Cheer...Tony

Hound_Dog
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 18
Joined: Sat Aug 08, 2015 10:46 pm
Location: Sydney
Location: Sydney

Re: Cold Cylinders x 2

Post by Hound_Dog »

herdygerdy wrote:Hi Hound Dog,

Whereabouts in Sydney are you? I am pretty sure I can help, but will be out of town for the early part of this week. I am in the Inner West.

PM me your details and I am confident that together we can get this sorted for you quick smart, even if it means taking parts off mine to help isolate your problem.

Cheer...Tony

Tony you have a PM mate.

Larry Zimmer
ICOA Web Post/Pix/Video Archive Mgt
ICOA Web Post/Pix/Video Archive Mgt
Posts: 2195
Joined: Mon Dec 15, 2003 2:32 pm
Location: Brighton, MI
Location: Brighton, Mich
Contact:

Re: Cold Cylinders x 2

Post by Larry Zimmer »

Great!! :P That's what makes this thing tick.
Larry Zimmer
cbxlarry@sbcglobal.net

geebee58
ICOA Member
ICOA Member
Posts: 11
Joined: Fri Dec 25, 2015 8:50 pm
Location: Lammermoor, Queensland
Location: Lammermoor, Queensland

Re: Cold Cylinders x 2

Post by geebee58 »

Hi Hound Dog,

What was the go in the end? Guessing it ended up being electrical?

Cheers,

Gary

User avatar
herdygerdy
Power Poster
Power Poster
Posts: 266
Joined: Fri Nov 22, 2013 9:48 pm
Location: Sydney, Australia
Location: Sydney, Australia

Re: Cold Cylinders x 2

Post by herdygerdy »

Hound_Dog wrote:
herdygerdy wrote:Hi Hound Dog,

Whereabouts in Sydney are you? I am pretty sure I can help, but will be out of town for the early part of this week. I am in the Inner West.

PM me your details and I am confident that together we can get this sorted for you quick smart, even if it means taking parts off mine to help isolate your problem.

Cheer...Tony

Tony you have a PM mate.
Hi Hound Dog,

I don't think I ever got your pm... (Or am I having a 'Senior's moment'?). Holler if you still need help.

Cheers...Tony

User avatar
herdygerdy
Power Poster
Power Poster
Posts: 266
Joined: Fri Nov 22, 2013 9:48 pm
Location: Sydney, Australia
Location: Sydney, Australia

Re: Cold Cylinders x 2

Post by herdygerdy »

Hey Hound Dog,

Where about in Sydney are you? I am in the Inner West and would be happy to help out if you need it.

While you are faffin' about with your ignition, strongly recommend installation of an ignition coil relay. This easy mod feeds 12v direct from battery straight into the coils. I tested a friends one on the weekend and with the stock setup there was a 2 volt drop between battery and ignition coils.

Send me a pm and I'll be happy to help you out with all manner of things CBX incl. carb balance, valve clearances etc.

Cheers...Tony

Caley-Thistle
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 8
Joined: Sun Oct 03, 2010 9:33 am
Location: Elgin, Scotland
Location: Elgin, Scotland

Re: Cold Cylinders x 2

Post by Caley-Thistle »

And the solution was?

Post Reply

Return to “CARBS: Cleaning, Rebuilding, Swaps, Aftermarket, Tuning, Syncing, and More”